banner_page

INA321EA/2K5

16mA per Channel 0.5pA 80 dB Instrumentational OP Amps 2.5V~5.5V ±1.25V~2.75V INA321 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-INA321EA/2K5
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 657
  • Description: 16mA per Channel 0.5pA 80 dB Instrumentational OP Amps 2.5V~5.5V ±1.25V~2.75V INA321 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Weight 25.996513mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Resistance 10 TΩ
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number INA321
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 3
Number of Circuits 1
Operating Supply Current 40μA
Nominal Supply Current 60μA
Quiescent Current 40μA
Slew Rate 0.4V/μs
Amplifier Type Instrumentation
Common Mode Rejection Ratio 80 dB
Current - Input Bias 0.5pA
Voltage - Supply, Single/Dual (±) 2.5V~5.5V ±1.25V~2.75V
Output Current per Channel 16mA
Input Offset Voltage (Vos) 1mV
Bandwidth 500 kHz
Gain Bandwidth Product 500 kHz
Voltage Gain 60dB
Power Supply Rejection Ratio (PSRR) 86.02dB
Supply Voltage Limit-Max 7.5V
Voltage - Input Offset 200μV
-3db Bandwidth 0.5MHz
Voltage Gain-Nom 25
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

INA321EA/2K5 Overview


There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the Instrumentation type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -55°C~125°C. Using an 40μA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 60dB. The buffer amp consists of 1 circuits in total. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 3. The linear amplifier is packaged by using a TR axis. 40μA quiescent currents are flowing through buffer op amp. 10 TΩ should be the range of resistance for the linear amplifier.

INA321EA/2K5 Features


8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ

INA321EA/2K5 Applications


There are a lot of Texas Instruments INA321EA/2K5 Instrumentational OP Amps applications.

  • High/low-pass filter circuit
  • Communication
  • Fission chambers
  • Image computer boards
  • Precision measurement
  • Logarithmic operation circuits
  • earphone
  • Medical imaging
  • Band-pass filter
  • Fast A/D and D/A converters

Write a review

Note: HTML is not translated!
    Bad           Good