INA321EA/2K5G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA321 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 60μA |
| Quiescent Current | 40μA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 500 kHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 0.5MHz |
| Voltage Gain-Nom | 25 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA321EA/2K5G4 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a Instrumentation-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 5V volts. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 40μA. The voltage gain should stay at 60dB. On this instrumentation amplifier, there are 1 circuits that are connected together. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is a rating of 3 for the operating supply voltage of the buffer op amp. TR is adopted to pack the instrumentation amplifier. 40μA quiescent currents are flowing through buffer op amp. 10 TΩ should be the range of resistance for the instrumentation amplifier.
INA321EA/2K5G4 Features
8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA321EA/2K5G4 Applications
There are a lot of Texas Instruments INA321EA/2K5G4 Instrumentational OP Amps applications.
- Biopotential
- Mobile phone
- Polarized electrodes
- Power generator
- Wireless base stations
- Voltage regulation circuit
- Test and measurement instruments
- Multimedia playback equipment
- High speed sample
- Communication
