INA331AIDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA331 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 415μA |
| Nominal Supply Current | 490μA |
| Quiescent Current | 415μA |
| Slew Rate | 5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 7.5V |
| Voltage - Input Offset | 250μV |
| -3db Bandwidth | 2MHz |
| Voltage Gain-Nom | 25 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA331AIDGKR Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a Instrumentation-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 415μA. You should keep the voltage gain at 60dB for the time being. There are 1 circuits on op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. According to the specifications of the buffer op amp, the operating supply voltage is rated at 3. For packing the buffer amplifier, the TR-axis is adopted. The quiescent current is 415μA. Instrumentation amplifier resistance should remain within the range of 10 TΩ.
INA331AIDGKR Features
8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
INA331AIDGKR Applications
There are a lot of Texas Instruments INA331AIDGKR Instrumentational OP Amps applications.
- Signal filtering
- Professional videography
- High/low-pass filter circuit
- Video amplifiers
- Biopotential
- MP3
- Oscilloscopes
- Semiconductor detectors
- High gain DC amplifier
- Communication
