INA338AIDGSTG4
| Parameters | |
|---|---|
| Package / Case | VSSOP |
| Surface Mount | YES |
| Number of Pins | 10 |
| Packaging | Tape and Reel |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Instrumentation Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 10 |
| Number of Elements | 3 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 3.4mA |
| Quiescent Current | 2.4mA |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 2nA |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 1 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 93.97dB |
| -3db Bandwidth | 1 kHz |
| Input Offset Current-Max (IIO) | 0.002μA |
| Voltage Gain-Nom | 100 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
INA338AIDGSTG4 Overview
It is packaged in an VSSOP-case that protects the operational amplifiers from damage. Buffer amps of this type are called INSTRUMENTATION AMPLIFIER-types. The op amp is delivered to you in a Tape and Reel case. It is estimated that there will be 10 terminations in the next few months. In this case, there are 10 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriInstrumentation Amplifiered as a Instrumentation Amplifier-type device. 10 pins are available on the instrumentation amplifier. There is an input offset voltage of 100μV for this buffer op amp. Operational amplifier can operate supply current at 2.4mA. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 125°C. There are 3 elements in this buffer amplifier. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. Keeping the linear amplifier's supply voltage above 2.7V is recommended. There is a quiescent current of 2.4mA in this operational amplifier circuit. 10GOhm is the range in which the instrumentation amplifier resistance should lie.
INA338AIDGSTG4 Features
10 Pins
supply voltage of 5V
80dB voltage gain
Resistance of 10GOhm
INA338AIDGSTG4 Applications
There are a lot of Texas Instruments INA338AIDGSTG4 Instrumentational OP Amps applications.
- Image computer boards
- High/low-pass filter circuit
- Non-polarized electrodes
- MP3
- Information processing
- Video conversion and routing
- Differentiator circuits
- Automotive sensors
- Micro signal measurement
- Navigation
