IP82C54-10Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 24 |
| Packaging | Bulk |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | TIMER, PROGRAMMABLE |
| Number of Bits | 16 |
| Propagation Delay | 100 ns |
| Turn On Delay Time | 100 ns |
| Number of Timers/Counters | 1 |
| High Level Output Current | -2.5mA |
| Low Level Output Current | 2.5mA |
| Information Access Method | PARALLEL, DIRECT ADDRESS |
| Height | 4.95mm |
| Length | 32.7mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IP82C54-10Z Overview
It is enclosed in the PDIP packaging along with the digital timer. The frequency of the programmable timer is set to 10MHz.It is used to pack in Bulk case. To mount this digital timer with Through Hole. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 24 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 24 . The number of the chip's terminations sums up to 24. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
IP82C54-10Z Features
Operate frequency at 10MHz
Package / Case: Bulk
Max Operating temperature at -40°C
1 Timers/Counters
IP82C54-10Z Applications
There are a lot of Intersil (Renesas Electronics America) IP82C54-10Z Programmable Timers & Oscillators applications.
- Consumer Electronics
- Clutch Actuator circuit
- Safety and Security Platforms
- Battery-Powered Systems
- Periodic “Wake-Up” Call
- Precision timing
- Power-Gating Applications
- Home Automation Sensors
- Delay circuits
- Tamper Detection
