IPS0151S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | D2PAK |
| Number of Pins | 3 |
| Packaging | Bulk |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.8A |
| Operating Supply Voltage | 35V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current per Channel | 3.8A |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 35A |
| Drain to Source Resistance | 25mOhm |
| Turn Off Time | 2 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 9.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS0151S Overview
There is a D2PAK package that includes this.In the current state, 1 channels are accessible.In the form of a Bulk, it is packaged.The terminations total 2.Its terminal position is SINGLE.4 pins make up the entire device.A supply voltage of 14V can result in high efficiency.In order to operate, 3 pins are used.This gadget is self-contained in?Peripheral Drivers.In Surface Mount direction, it is positioned.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.For reliability, it must work at a minimum temperature of -40°C degrees Celsius.In order to meet the operation criteria, the maximum output current must be reduced to 3.8A.There is a 20mOhm resistance on this device.
IPS0151S Features
The terminal position of 4
IPS0151S Applications
There are a lot of International Rectifier IPS0151S hot swap controllers applications.
- Limitting the inrush current
- Load transient protection
- Network router
- Industrial high-side switches
- Telecommunications
- Electric vehicle
- Server backplane system
- Base station power distribution system
- Current monitor output
- Current monitoring
