IPS0151S
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Base Part Number | IPS0151S |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 3.8A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 20m Ω |
| Turn Off Time | 2 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.957mm |
| Width | 9.08mm |
| RoHS Status | Non-RoHS Compliant |
IPS0151S Overview
It is package in Tube case.There is a package for it in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.The IPS0151S family consists of this type.The termination count is 2.Currently, the lighting driver has a total of 1 functions.3.8AV is the maximum output of the LED driver.Using a voltage of 14V allows for high efficiency.
IPS0151S Features
Supplied from 14V
IPS0151S Applications
There are a lot of Infineon Technologies IPS0151S Power Switches ICs applications.
- HDD, SSD
- Hot Swap
- Hard Disk Drives
- Wireless Modem Data Cards
- USB Power Distribution
- Hot Swap
- USB Ports/Hubs
- Portable GPS Device
- Wearable Devices
- Storage (HDDs, SSDs)
