IPS021
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | TIN LEAD |
| Voltage - Rated DC | 50V |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 1.8A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IPS021 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Interface | On/Off |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.8A |
| Rise Time | 900ns |
| Fall Time (Typ) | 1.3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 130m Ω |
| Drain to Source Resistance | 150mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS021 Overview
Tube is how it's packaged.This package is included in TO-220-3.This lighting drivere has a mounting type of Through Hole.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.The IPS021 family consists of this type.A total of 3 terminations have been recorded.For operation, we use the 3 pins.Currently, the lighting driver has a total of 1 functions.The maximum output current is reduced to 1.8A to meet the operation criteria.A supply voltage of 14V leads to high efficiency.In this case, it is mounted in the way of Through Hole.130mOhm is the resistance of the lighting driver.When this case is used, the output current is set to 1.8A.
IPS021 Features
Supplied from 14V
Resistance of 130mOhm
IPS021 Applications
There are a lot of Infineon Technologies IPS021 Power Switches ICs applications.
- Hot Swap
- PC Cards
- Various applications equipped with buttons
- Hard Disk Drives
- Portable Music Players
- Portable/Handheld Devices
- Mobile Communication Devices
- Hot Swaps
- Storage (HDDs, SSDs)
- Wireless Headsets
