IPS021LTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.3mm |
| Current Rating | 1.4A |
| Base Part Number | IPS021L |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.4A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 130m Ω |
| Drain to Source Resistance | 150mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS021LTR Overview
Tape & Reel (TR) is how it's packaged.It's included in the TO-261-4, TO-261AA package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the IPS021L family.In total, there are 4 terminations.The operation is carried out using the 4 pins.As far as functions are concerned, the lighting driver has 1.As a result, the maximum output current is reduced to 1.4A in order to meet the operation requirements.High efficiency is possible at 14V supply voltage.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 130mOhm resistance are used.In order to achieve the best efficiency, the supply voltage should be set to 35V.
IPS021LTR Features
Supplied from 14V
Resistance of 130mOhm
IPS021LTR Applications
There are a lot of Infineon Technologies IPS021LTR Power Switches ICs applications.
- PC Cards
- Gaming
- Wearable Devices
- PDAs
- Notebook and Tablet Computers
- Hot Swap
- Hot Swap
- Smart Phones, Feature Phones
- Smartphone and PDA
- Wireless Headsets
