IPS021S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | D2PAK |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | MATTE TIN OVER NICKEL |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Voltage - Rated DC | 50V |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Max Output Current | 1.8A |
| Temperature Grade | AUTOMOTIVE |
| Interface | On/Off |
| Power Dissipation-Max | 1.56W |
| Output Configuration | Low Side |
| Power Dissipation | 1.56W |
| Current - Output | 1.8A |
| Output Current per Channel | 1.8A |
| Nominal Input Voltage | 5V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Drain to Source Resistance | 150mOhm |
| Turn Off Time | 3.5 µs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.69mm |
| Width | 8.79mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS021S Overview
It's included in the D2PAK package.Bulk-shaped packaging is used for this product.The terminations total 2.There is a SINGLE terminal position on the device.4 pins make up its total.High efficiency can be achieved with a voltage supply of 14V.A gadget like this is self-contained in Peripheral Drivers.Surface Mount directs its position.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.Hot Swap is defaulted to output 1.This results in a maximum output current of 1.8A, which meets the operation criteria.There is a 130mOhm resistance on this device.
IPS021S Features
The terminal position of 4
IPS021S Applications
There are a lot of International Rectifier IPS021S hot swap controllers applications.
- Automotive circuits
- Firewire
- Modern analog communication
- Limitting the inrush current
- Industrial application
- Inrush current control
- Network switch
- Supply voltage monitoring
- Current monitor output
- Thermal limitation
