IPS021S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IPS021S |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Interface | On/Off |
| Current - Output (Max) | 1.8A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 130m Ω |
| Turn Off Time | 3.5 µs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.69mm |
| Width | 8.79mm |
| RoHS Status | Non-RoHS Compliant |
IPS021S Overview
As you can see, it's packaged in the way of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts.It comes under the family of IPS021S.The termination count is 2.Currently, there are 1 functions associated with the lighting driver.In terms of output, the lighting driver can provide a maximum of 1.8A V.High efficiency is possible when the supply voltage is set to 14V.The maximum supply voltage for this LED driver is 35V (Vsup).
IPS021S Features
Supplied from 14V
IPS021S Applications
There are a lot of Infineon Technologies IPS021S Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- PC Cards
- Various applications equipped with buttons
- Notebook PC
- Hot Swap
- PC Card Hot Swap
- Set-top-box
- Gaming
- Hot Swaps
