IPS022G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Current Rating | 1A |
| Base Part Number | IPS022G |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 35V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1A |
| Rise Time | 900ns |
| Fall Time (Typ) | 1.3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 130m Ω |
| Drain to Source Resistance | 150mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS022G Overview
A Tube is used to package it.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 2 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the IPS022G family.As a result, there are 8 terminations.The 8 pins are used to operate the LED driver.There are 1 functions of the LED driver.The maximum output current drops to 1A in order to meet the operation criteria.Surface Mount is mounted in the way.It has 130mOhm resistance.The output current is set to 1A in this case.In total, 1 channels are available.In order to maximize efficiency, the supply voltage should be set to 35V.
IPS022G Features
Resistance of 130mOhm
1 channels
IPS022G Applications
There are a lot of Infineon Technologies IPS022G Power Switches ICs applications.
- Hot Swaps
- Hot Swap
- Notebook and Tablet Computers
- USB Power Distribution
- Handheld Devices
- USB3.1 Power Delivery
- PDAs
- Storage Drives
- Smartphone and PDA
- USB Power Distribution
