IPS024G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2002 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 14V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 10A |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Nominal Supply Current | 700mA |
| Power Dissipation | 1W |
| Output Current per Channel | 700mA |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Turn On Time | 1 μs |
| Output Peak Current Limit-Nom | 6A |
| Drain to Source Resistance | 150mOhm |
| Turn Off Time | 3.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS024G Overview
You can find it in the SOIC package.At the moment, there are 4 channels available.It's?packaged?in?the?form?of?a?Bulk.16 terminations are present in total.The terminal position of the device is DUAL.The device has a total of 16 pins.The supply voltage 14V is necessary for high efficiency.For operation, 16 pins are used.In Peripheral Drivers, this gadget is self-contained.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.When operating criteria are met, the maximum output current is reduced to 10A.Devices with 135mOhm resistance are available.
IPS024G Features
The terminal position of 16
IPS024G Applications
There are a lot of International Rectifier IPS024G hot swap controllers applications.
- Active current limit
- Redundant negative voltage supplies
- Telecom server
- Firewire
- Data communication systems
- High power circuit board
- Solid state circuit breakers
- Other forms of communications infrastructure
- Network router
- Continuous monitoring of device temperature
