IPS031RTRL

N-Channel PMIC TO-252-3, DPak (2 Leads + Tab), SC-63

Manufacturer: Infineon Technologies
Nocochips NO: 376-IPS031RTRL
Package: TO-252-3, DPak (2 Leads + Tab), SC-63
Datasheet: PDF
Stock: 883
Description: N-Channel PMIC TO-252-3, DPak (2 Leads + Tab), SC-63 (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package	TO-252, (D-Pak)
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2004
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Max Operating Temperature	150°C
Min Operating Temperature	-40°C
Max Power Dissipation	2.5W
Number of Outputs	1
Output Type	N-Channel
Interface	On/Off
Current - Output (Max)	3.3A
Nominal Supply Current	10mA
Output Configuration	Low Side
Power Dissipation	2.5W
Output Current	3.3A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Ratio - Input:Output	1:1
Voltage - Load	35V Max
Fault Protection	Current Limiting (Fixed), Over Temperature
Rds On (Typ)	45mOhm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

IPS031RTRL Overview

As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the TO-252-3, DPak (2 Leads + Tab), SC-63 package as well.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.There is a maximum output of 3.3AV from the LED driver.The lighting driver is mounted in the way of Surface Mount.In this case, the output current is set to 3.3A.It is designed to be stable at 150°C°C, which is the maximum operating temperature.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.