IPS031S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IPS031S |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Interface | On/Off |
| Current - Output (Max) | 2.8A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 0.6 µs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 45m Ω |
| Turn Off Time | 3.5 µs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.69mm |
| Width | 8.79mm |
| RoHS Status | Non-RoHS Compliant |
IPS031S Overview
It is packaged in the form of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The IPS031S family consists of this type.As a result, there are 2 terminations.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 2.8AV.As long as the supply voltage is 14V, high efficiency can be achieved.The Vsup value (maximum supply voltage) is set to 35V.
IPS031S Features
Supplied from 14V
IPS031S Applications
There are a lot of Infineon Technologies IPS031S Power Switches ICs applications.
- Hot-Swap Systems
- PC Cards
- Hot Swap
- Telecom and Network Systems
- Storage Drives
- USB Power Distribution
- Portable GPS Device
- HDD and SSD
- Gaming
- Portable GPS
