IPS031STRR

N-Channel PMIC IPS031S 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Manufacturer: Infineon Technologies
Nocochips NO: 376-IPS031STRR
Package: TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Datasheet: PDF
Stock: 449
Description: N-Channel PMIC IPS031S 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins	3
Supplier Device Package	D2PAK
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2001
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	45mOhm
Max Operating Temperature	150°C
Min Operating Temperature	-40°C
Max Power Dissipation	1.56W
Base Part Number	IPS031S
Number of Outputs	1
Output Type	N-Channel
Max Output Current	18A
Interface	On/Off
Current - Output (Max)	2.8A
Nominal Supply Current	10mA
Output Configuration	Low Side
Power Dissipation	1.56W
Output Current	2.2A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Output Current per Channel	2.8A
Ratio - Input:Output	1:1
Voltage - Load	35V Max
Fault Protection	Current Limiting (Fixed), Over Temperature
Rds On (Typ)	45mOhm
RoHS Status	Non-RoHS Compliant

IPS031STRR Overview

It is packaged in the manner of a Tape & Reel (TR).This package is included in TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It comes under the family of IPS031S.The operation is performed through the 3 pins.The maximum output of the LED driving board is 2.8AV.This results in the maximum output current dropping to 18A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 45mOhm ohms.This case results in a 2.2A output current.Keeping the operating temperature at 150°C°C ensures stable operation.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.