IPS041LTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-223 |
| Number of Pins | 4 |
| Published | 2001 |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 370mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.3mm |
| Current Rating | 750mA |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Interface | On/Off |
| Power Dissipation-Max | 1W |
| Element Configuration | Single |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Current - Output | 750mA |
| Turn On Delay Time | 500 ns |
| Output Current per Channel | 750mA |
| Rise Time | 1.3μs |
| Fall Time (Typ) | 1.5 μs |
| Turn-Off Delay Time | 2.5 μs |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 1.1A |
| Drain to Source Resistance | 500mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS041LTR Overview
In the SOT-223 package you will find it.There are a total of 4 terminations on it.In this case, the device is located at terminal DUAL.Total number of pins is 3.High efficiency is possible at a voltage of 14V.4 pins are used to operate the system.There is a Surface Mount-axis orientation to it.For stable operation, the maximum operating temperature should be 150°C°C.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.Hot Swap is set by default to output 1.When operating criteria are met, the maximum output current is reduced to 750mA.There is 370mOhm resistance in the device.
IPS041LTR Features
The terminal position of 3
IPS041LTR Applications
There are a lot of International Rectifier IPS041LTR hot swap controllers applications.
- Industrial
- Server backplane system
- Base station power distribution system
- Load transient protection
- Board or blade insertion into live backplanes
- Storage network
- Remote access server
- Disconnect faulty loads before supply voltage drops
- Limitting the inrush current
- Temperature monitor output
