IPS042G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 370mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Current Rating | 530mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Max Output Current | 530mA |
| Operating Supply Voltage | 35V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Current - Output | 530mA |
| Output Current per Channel | 530mA |
| Rise Time | 1.3μs |
| Fall Time (Typ) | 1.5 μs |
| Driver Number of Bits | 2 |
| Fault Protection | Over Temperature |
| Turn On Time | 0.5 µs |
| Output Peak Current Limit-Nom | 1.1A |
| Drain to Source Resistance | 500mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS042G Overview
You get it with the SOIC package.In the current state, 2 channels are accessible.Bulk-shaped packaging is used for this product.This device has a total of 8 terminations.Device DUAL is located at the terminal position.The device has a total of 8 pins.High efficiency is possible at a voltage of 14V.This device uses 8 pins for operation.A gadget like this is self-contained in Peripheral Drivers.Surface Mount directs its position.The maximum operating temperature of 150°C°C allows for stable operation.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.Maximum supply voltage is 6VV.Hot Swap works wHot Swaph as low a voltage as possible, such as 4VV.In order to meet the operation criteria, the maximum output current must be reduced to 530mA.There is a 370mOhm resistance on this device.
IPS042G Features
The terminal position of 8
IPS042G Applications
There are a lot of International Rectifier IPS042G hot swap controllers applications.
- Base station
- Disconnect faulty loads before supply voltage drops
- Supply voltage monitoring
- Network switches
- Safe board insertion and extraction
- Comprehensive analog and digital capabilities
- Network switch
- Telecommunications
- Temperature monitor output
- High power circuit board
