IPS042GTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Tape and Reel |
| Published | 2001 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 370mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 530mA |
| Pin Count | 8 |
| Max Output Current | 530mA |
| Operating Supply Voltage | 35V |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Max Supply Current | 530mA |
| Current - Output | 530mA |
| Turn On Delay Time | 500 ns |
| Min Input Voltage | 4V |
| Max Input Voltage | 6V |
| Output Current per Channel | 530mA |
| Rise Time | 1.3μs |
| Fall Time (Typ) | 1.5 μs |
| Turn-Off Delay Time | 2.5 μs |
| Fault Protection | Over Temperature |
| Output Peak Current Limit-Nom | 1.1A |
| Drain to Source Resistance | 500mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS042GTR Overview
This is included in the SOIC package.At the moment, 2 channels are accessible.It's?packaged?in?the?form?of?a?Tape and Reel.There are 8 terminations in total.DUAL is the terminal position of the device.The device has a total of 8 pins.High efficiency can be achieved by using 14V as supply voltage.Hot-swappable device is necessary to use 8 pins in order to operate the device.Positioned in direction of Surface Mount, it is at a right angle.Operating at 150°C°C ensures stable performance.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.Hot Swap is capable of handling a maximum supply voltage of 6VV.With 4VV, it can work with the lowest supply voltage possible.In order to meet the operation criteria, the maximum output current must be reduced to 530mA.Hot Swap requires a maximum current of 530mA to operate.There is a 370mOhm resistance on this device.
IPS042GTR Features
The terminal position of 8
IPS042GTR Applications
There are a lot of International Rectifier IPS042GTR hot swap controllers applications.
- CompactPCI
- Network router
- Servers
- Inrush current control
- Switch
- Continuous monitoring of device temperature
- Network switch
- Industrial
- Supply voltage monitoring
- Other forms of communications infrastructure
