IPS1011PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Supplier Device Package | TO-220AB |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| Type | Switch |
| Resistance | 10mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Current Rating | 18A |
| Base Part Number | IPS1011PBF |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 18A |
| Current | 18A |
| Output Configuration | Low Side |
| Power Dissipation | 25W |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 18A |
| Rise Time | 50μs |
| Drain to Source Voltage (Vdss) | 36V |
| Fall Time (Typ) | 70 μs |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 18A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Dual Supply Voltage | 28V |
| Rds On (Typ) | 10mOhm |
| Drain to Source Resistance | 10mOhm |
| Nominal Vgs | 1.7 V |
| Height | 16.51mm |
| Length | 10.6426mm |
| Width | 4.82mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1011PBF Overview
It's?packaged?in?the way?of?a?Tube.This package is included in TO-220-3.This lighting drivere has a mounting type of Through Hole.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of IPS1011PBF.The 3 pins are used for the operation of the system.18AV is the maximum output of the LED driver.The maximum output current drops to 18A in order to meet the operation criteria.The lighting driver is mounted in the way of Through Hole.The LED driver has 10mOhm resistance.As a result, the output current is set to 85A.In order to maximize efficiency, the supply voltage should be set to 36V.The maximum operating temperature of 150°C°C allows for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.A supply voltage of 4.5VV is sufficient for it to work.Electrical components classified as Switch belong to this category.
IPS1011PBF Features
Resistance of 10mOhm
IPS1011PBF Applications
There are a lot of Infineon Technologies IPS1011PBF Power Switches ICs applications.
- Smartphone and PDA
- Hot Swap
- Set-top-box
- Mobile Communication Devices
- Solid State Drivers
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- PC Cards
- HDD, SSD
- Hot Swaps
