IPS1011RPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Resistance | 10mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 18A |
| Base Part Number | IPS1011RPBF |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 6A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 6A |
| Rise Time | 50μs |
| Drain to Source Voltage (Vdss) | 36V |
| Fall Time (Typ) | 70 μs |
| Continuous Drain Current (ID) | 6A |
| Threshold Voltage | 1.7V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Dual Supply Voltage | 28V |
| Rds On (Typ) | 10mOhm |
| Nominal Vgs | 1.7 V |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1011RPBF Overview
It's?packaged?in?the way?of?a?Tube.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.It is a member of the IPS1011RPBF family.The operation is performed through the 3 pins.6AV is the maximum output of the LED driver.The maximum output current must drop to 6A to meet the operation criteria.It is mounted in the way of Surface Mount.The LED driver has 10mOhm resistance.As a result, the output current is set to 85A.For maximum efficiency, the supply voltage should be set to 5.5V.Stable operation is possible with a maximum operating temperature of 150°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.A supply voltage of 4.5VV is sufficient for it to work.
IPS1011RPBF Features
Resistance of 10mOhm
IPS1011RPBF Applications
There are a lot of Infineon Technologies IPS1011RPBF Power Switches ICs applications.
- Wireless Modem Data Cards
- Mobile Communication Devices
- Portable GPS
- USB Power Distribution
- USB Ports/Hubs
- Wireless Headsets
- Hot-Swap Systems
- Telecom and Network Systems
- Portable Video Game Players
- USB Power Distribution
