IPS1011RTRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 18A |
| Base Part Number | IPS1011RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 10mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1011RTRLPBF Overview
It is package in Tape & Reel (TR) case.There is a package for it in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There is a IPS1011RPBF family of things that it belongs to.It is necessary to use the 3 pins in order to operate the LED driver.This lighting driver is capable of delivering a maximum output of 6A volts.This operation requires the maximum output current to be decreased to 6A.The LED driving board is mounted in the way of Surface Mount.10mOhm is the resistance of the lighting driver.This case has the output current set to 85A.For maximum efficiency, the supply voltage should be set to 5.5V.For stable operation, the maximum operating temperature is 150°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.
IPS1011RTRLPBF Features
Resistance of 10mOhm
IPS1011RTRLPBF Applications
There are a lot of Infineon Technologies IPS1011RTRLPBF Power Switches ICs applications.
- Set-Top Boxes
- Wireless Headsets
- Wireless Modem Data Cards
- Storage Drives
- Mobile Communication Devices
- USB Power Distribution
- HDD, SSD
- Hot Swap
- Portable/Handheld Devices
- Telecom and Network Systems
