IPS1011RTRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 6A |
| Base Part Number | IPS1011RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Current | 6A |
| Output Configuration | Low Side |
| Power Dissipation | 25W |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 70μA |
| Rds On (Typ) | 10mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1011RTRRPBF Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The IPS1011RPBF family consists of this type.For operation, 3 pins are used.In terms of output, the lighting driver can provide a maximum of 6A V.To meet the operation criteria, the maximum output current drops to 6A.As a result, it is mounted in the manner of Surface Mount.There is 10mOhm resistance on the LED driver.When this case is used, the output current is set to 85A.In order to maximize efficiency, the supply voltage should be set at 5.5V.For stable operation, the maximum operating temperature should be 150°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.
IPS1011RTRRPBF Features
Resistance of 10mOhm
IPS1011RTRRPBF Applications
There are a lot of Infineon Technologies IPS1011RTRRPBF Power Switches ICs applications.
- Portable Music Players
- Hard Disk Drives
- Portable GPS
- Hot Swaps
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Portable Video Game Players
- USB Power Distribution
- USB3.1 Power Delivery
- Wireless Headsets
