IPS1011STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 18A |
| Base Part Number | IPS1011SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 6.5A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 6.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 10mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.303mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1011STRLPBF Overview
It is package in Tape & Reel (TR) case.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the IPS1011SPBF family.For operation, 3 pins are used.The LED driver output is limited to 6.5AV.The maximum output current must drop to 6.5A to meet the operation criteria.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 10mOhm ohms.In this case, the output current will be set to 85A.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Keeping the operating temperature at 150°C°C ensures stable operation.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.
IPS1011STRLPBF Features
Resistance of 10mOhm
IPS1011STRLPBF Applications
There are a lot of Infineon Technologies IPS1011STRLPBF Power Switches ICs applications.
- USB Protection
- Hard Disk Drives
- Set-top-box
- Set-Top Boxes
- Various applications equipped with buttons
- PC Card Hot Swap
- USB Power Distribution
- Wearable Devices
- Portable/Handheld Devices
- Portable Devices
