IPS1011STRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 18A |
| Base Part Number | IPS1011SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 6.5A |
| Current | 6.5A |
| Output Configuration | Low Side |
| Power Dissipation | 25W |
| Output Current | 85A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 6.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 70μA |
| Rds On (Typ) | 10mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1011STRRPBF Overview
Tape & Reel (TR) is how it's packaged.This file is included in package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.It belongs to the IPS1011SPBF family.The operation is performed through the 3 pins.This LED driver has a maximum output of 6.5AV.The maximum output current must drop to 6.5A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.There is 10mOhm resistance on the LED driver.The output current is set to 85A in this case.Optimal efficiency requires a voltage of 5.5V.For stable operation, the maximum operating temperature is 150°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.
IPS1011STRRPBF Features
Resistance of 10mOhm
IPS1011STRRPBF Applications
There are a lot of Infineon Technologies IPS1011STRRPBF Power Switches ICs applications.
- Smartphone and PDA
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- USB Protection
- Hot Swap
- Set-top-box
- Portable GPS Device
- USB Power Distribution
- Wireless/Networking Cards
- Portable/Handheld Devices
