IPS1021PBF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Supplier Device Package | TO-220AB |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 20mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Current Rating | 13.5A |
| Base Part Number | IPS1021PBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 13.5A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 13.5A |
| Output Configuration | Low Side |
| Power Dissipation | 25W |
| Output Current | 13.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 13.5A |
| Rise Time | 30μs |
| Fall Time (Typ) | 30 μs |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Current | 32μA |
| Rds On (Typ) | 20mOhm |
| Drain to Source Resistance | 25mOhm |
| Height | 9.02mm |
| Length | 10.6426mm |
| Width | 4.826mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1021PBF Overview
The package is in the form of a Tube.The TO-220-3 package contains it.It has been mounted as Through Hole on the LED driver.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The IPS1021PBF family consists of this type.For operation, we use the 3 pins.The maximum output of the LED driving board is 13.5AV.The maximum output current must drop to 13.5A to meet the operation criteria.Through Hole is mounted in the way.It has a resistance of 20mOhm.As a result, the output current is set to 13.5A.It is recommended to set the supply voltage to 36V for optimum efficiency.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.It can work with as low a supply voltage as feasible, such as 4.5VV.
IPS1021PBF Features
Resistance of 20mOhm
IPS1021PBF Applications
There are a lot of Infineon Technologies IPS1021PBF Power Switches ICs applications.
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- USB Protection
- Portable GPS Device
- Solid-State Drives
- Solid State Drivers
- Hot-Swap Systems
- Wireless Modem Data Cards
- Portable GPS
- Set-Top Boxes
