IPS1021RTRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 20mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 13.5A |
| Base Part Number | IPS1021RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 4.3A |
| Current | 4.3A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 4.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 4.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 20mOhm |
| Drain to Source Resistance | 20mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IPS1021RTRLPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The IPS1021RPBF family contains this object.For operation, we use the 3 pins.4.3AV is the maximum output of the LED driver.It is necessary to reduce the maximum output current to 45A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.Lighting drivers with 20mOhm resistance are used.This case results in a 4.3A output current.A supply voltage of 5.5V is recommended for maximum efficiency.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.This electrical component is classified as Switch.
IPS1021RTRLPBF Features
Resistance of 20mOhm
IPS1021RTRLPBF Applications
There are a lot of Infineon Technologies IPS1021RTRLPBF Power Switches ICs applications.
- Set-Top Boxes
- Portable GPS Device
- PC Card Hot Swap
- Mobile Communication Devices
- Hot Swaps
- USB Protection
- HDD, SSD
- Smartphone and PDA
- Gaming
- Set-top-box
