IPS1021STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 20mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 4.8A |
| Base Part Number | IPS1021SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4.8A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 4.8A |
| Current | 4.8A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 4.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Output Current per Channel | 4.8A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 20mOhm |
| Drain to Source Resistance | 20mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1021STRLPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts has been specified.I believe it belongs to the IPS1021SPBF family.3 pins are used for operation.4.8AV is the maximum output of the LED driver.Maximum output current falls to 4.8A when operation criteria are met.It is mounted in the way of Surface Mount.20mOhm resistance is present in the lighting driver.The output current is set to 4.8A in this case.In order to optimize the efficiency of the supply voltage, it should be set to 36V.A maximum operating temperature of 150°C°C is required to provide stable operation.To ensure reliability, it should operate at -40°C degrees Celsius.Electrical components classified as Switch are included in this category.
IPS1021STRLPBF Features
Resistance of 20mOhm
IPS1021STRLPBF Applications
There are a lot of Infineon Technologies IPS1021STRLPBF Power Switches ICs applications.
- Portable Music Players
- Smartphone and PDA
- PDAs
- Telecom and Network Systems
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Notebook PC
- USB3.1 Power Delivery
- PC Cards
- Portable Video Game Players
