IPS1021STRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 20mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 13.5A |
| Base Part Number | IPS1021SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4.8A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 4.8A |
| Current | 4.8A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 4.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 4.8A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 70μA |
| Rds On (Typ) | 20mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1021STRRPBF Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package that includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is a member of the IPS1021SPBF family.During operation, the 3 pins are used.This LED driver has a maximum output of 4.8AV.The maximum output current is reduced to 4.8A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.It has 20mOhm resistance.This case has the output current set to 4.8A.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.A maximum operating temperature of 150°C°C is required for stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.
IPS1021STRRPBF Features
Resistance of 20mOhm
IPS1021STRRPBF Applications
There are a lot of Infineon Technologies IPS1021STRRPBF Power Switches ICs applications.
- Handheld Devices
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Set-Top Boxes
- Hot Swap
- Solid State Drivers
- Portable GPS Device
- PC Card Hot Swap
- PDAs
- Low Voltage I/O System Power
