IPS1031RPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 40mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 4A |
| Base Part Number | IPS1031RPBF |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 3A |
| Current | 3A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 36V |
| Output Current per Channel | 3A |
| Rise Time | 20μs |
| Fall Time (Typ) | 15 μs |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 40mOhm |
| Drain to Source Resistance | 40mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1031RPBF Overview
As you can see, it's packaged in the way of a Tube.This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the family IPS1031RPBF.The operation is carried out using the 3 pins.This lighting driver is capable of delivering a maximum output of 3A volts.The maximum output current must drop to 3A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has 40mOhm resistance.This case results in a 18A output current.For maximum efficiency, the supply voltage should be set to 36V.For stable operation, the maximum operating temperature is 150°C°C.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.It can operate at 4.5V volts as well.Switch?is?the?classification?for?this?electrical?component.
IPS1031RPBF Features
Resistance of 40mOhm
IPS1031RPBF Applications
There are a lot of Infineon Technologies IPS1031RPBF Power Switches ICs applications.
- HDD, SSD
- PC Cards
- Mobile Communication Devices
- Wireless/Networking Cards
- Hot-Swap Systems
- Portable GPS
- Various applications equipped with buttons
- USB Protection
- Hot Swaps
- Portable Devices
