IPS1031RTRLPBF
| Parameters | |
|---|---|
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 4A |
| Base Part Number | IPS1031RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Current | 3A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Output Current per Channel | 3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 40mOhm |
| Drain to Source Resistance | 40mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 40mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
IPS1031RTRLPBF Overview
The package is in the form of a Tape & Reel (TR).It is included in the package TO-252-3, DPak (2 Leads + Tab), SC-63.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.It belongs to the IPS1031RPBF family.In order to operate, 3 pins are used.In terms of output, the lighting driver can provide a maximum of 3A V.The maximum output current drops to 3A in order to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has 40mOhm resistance.When this case is used, the output current is set to 18A.The supply voltage should be set at 5.5V for best efficiency.Keeping the operating temperature at 150°C°C ensures stable operation.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.There is a classification for this electrical component of Switch.
IPS1031RTRLPBF Features
Resistance of 40mOhm
IPS1031RTRLPBF Applications
There are a lot of Infineon Technologies IPS1031RTRLPBF Power Switches ICs applications.
- Wireless Headsets
- HDD and SSD
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Hot Swaps
- Smart Phones, Feature Phones
- Portable Video Game Players
- USB Power Distribution
- Hot Swap
- Portable Devices
