IPS1031RTRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 40mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Current Rating | 4A |
| Base Part Number | IPS1031RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Current | 3A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 70μA |
| Rds On (Typ) | 40mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1031RTRRPBF Overview
Tape & Reel (TR) is how it's packaged.It is included in the package TO-252-3, DPak (2 Leads + Tab), SC-63.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts has been specified.It belongs to the family IPS1031RPBF.For operation, we use the 3 pins.From the lighting driver, there is a maximum output of 3AV.To comply with the operation criteria, the maximum output current is reduced to 3A.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has a resistance of 40mOhm ohms.This case has the output current set to 18A.It is recommended that the supply voltage be set at 36V in order to achieve maximum efficiency.Stable operation is possible with a maximum operating temperature of 150°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.
IPS1031RTRRPBF Features
Resistance of 40mOhm
IPS1031RTRRPBF Applications
There are a lot of Infineon Technologies IPS1031RTRRPBF Power Switches ICs applications.
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Portable Music Players
- Portable/Handheld Devices
- Hot Swap
- Portable Devices
- USB Ports/Hubs
- USB Power Distribution
- Mobile Communication Devices
