IPS1031SPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 40mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 4A |
| Base Part Number | IPS1031SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.3A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 3.3A |
| Current | 3.3A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Output Current per Channel | 3.3A |
| Rise Time | 20μs |
| Fall Time (Typ) | 15 μs |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Current | 32μA |
| Rds On (Typ) | 40mOhm |
| Drain to Source Resistance | 40mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 9.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1031SPBF Overview
Tube is how it's packaged.It's included in the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It belongs to the IPS1031SPBF family.In order to operate, the 3 pins are used.3.3AV is the maximum output of the LED driver.The maximum output current is reduced to 3.3A to meet the operation criteria.Surface Mount is mounted in the way.40mOhm resistance is present in the lighting driver.When this is the case, the output current is set to 18A.The supply voltage should be set at 36V for best efficiency.Stable operation is possible with a maximum operating temperature of 150°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.The greatest supply voltage it can handle is 5.5VV.If required, it can operate at 4.5V volts as well.This electrical component has a classification of Switch.
IPS1031SPBF Features
Resistance of 40mOhm
IPS1031SPBF Applications
There are a lot of Infineon Technologies IPS1031SPBF Power Switches ICs applications.
- Smartphone and PDA
- USB Power Distribution
- Portable Music Players
- HDD, SSD
- Hard Disk Drives
- Portable Video Game Players
- Low Voltage I/O System Power
- Portable/Handheld Devices
- Hot Swap
- Notebook PC
