IPS1031STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 40mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 4A |
| Base Part Number | IPS1031SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.3A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3.3A |
| Current | 3.3A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Output Current per Channel | 3.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 40mOhm |
| Drain to Source Resistance | 40mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1031STRLPBF Overview
It is package in Tape & Reel (TR) case.It is included in the package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There is a IPS1031SPBF family of things that it belongs to.The operation is performed through the 3 pins.From the lighting driver, there is a maximum output of 3.3AV.The maximum output current is reduced to 3.3A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.In this case, there is 40mOhm resistance in the LED driving board.The output current is set to 18A in this case.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Stable operation is possible with a maximum operating temperature of 150°C°C.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.This electrical component has a classification of Switch.
IPS1031STRLPBF Features
Resistance of 40mOhm
IPS1031STRLPBF Applications
There are a lot of Infineon Technologies IPS1031STRLPBF Power Switches ICs applications.
- Set-top-box
- Mobile Communication Devices
- Set-Top Boxes
- Wireless Modem Data Cards
- Storage Drives
- HDD and SSD
- Hot Swap
- Storage (HDDs, SSDs)
- Hot Swaps
- Hot-Swap Systems
