IPS1031STRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 40mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Current Rating | 4A |
| Base Part Number | IPS1031SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.3A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 3.3A |
| Current | 3.3A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 70μA |
| Rds On (Typ) | 40mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1031STRRPBF Overview
A Tape & Reel (TR) is used to package it.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There is a IPS1031SPBF family of things that it belongs to.In order to operate, 3 pins are used.In this case, the LED driving board can produce only 3.3AV as its maximum output.This results in the maximum output current dropping to 3.3A to meet the operation criteria.It is positioned in the direction of Surface Mount.It has 40mOhm resistance.In this case, the output current is set to 18A.It is recommended to set the supply voltage to 5.5V for optimum efficiency.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.
IPS1031STRRPBF Features
Resistance of 40mOhm
IPS1031STRRPBF Applications
There are a lot of Infineon Technologies IPS1031STRRPBF Power Switches ICs applications.
- Portable Video Game Players
- USB Ports/Hubs
- Gaming
- HDD and SSD
- Wireless Modem Data Cards
- Solid-State Drives
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Telecom and Network Systems
- Portable GPS Device
