IPS1041LPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Supplier Device Package | SOT-223 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| Resistance | 80mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | IPS1041LPBF |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | N-Channel |
| Max Output Current | 1.95A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 1.95A |
| Current | 1.95A |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.95A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Output Current per Channel | 1.95A |
| Rise Time | 7μs |
| Drain to Source Voltage (Vdss) | 36V |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 1.95A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Dual Supply Voltage | 28V |
| Input Current | 32μA |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 100mOhm |
| Nominal Vgs | 1.7 V |
| Height | 1.6002mm |
| Length | 6.6802mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1041LPBF Overview
It is packaged in the manner of a Tube.Package TO-261-4, TO-261AA contains it.The LED driver is mounted as Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.The IPS1041LPBF family consists of this type.It is necessary to use the 3 pins in order to operate the LED driver.This lighting driver is capable of delivering a maximum output of 1.95A volts.This operation requires the maximum output current to be decreased to 1.95A.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 80mOhm resistance.As a result, the output current is set to 1.95A.In order to maximize efficiency, the supply voltage should be set at 36V.The maximum operating temperature of 150°C°C allows for stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.It is also capable of running at 4.5V volts if necessary.
IPS1041LPBF Features
Resistance of 80mOhm
IPS1041LPBF Applications
There are a lot of Infineon Technologies IPS1041LPBF Power Switches ICs applications.
- Hot Swaps
- Smart Phones, Feature Phones
- Telecom and Network Systems
- PC Card Hot Swap
- Portable/Handheld Devices
- Storage Drives
- USB Power Distribution
- Hot Swap
- Wireless Headsets
- Low Voltage I/O System Power
