IPS1041LTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Supplier Device Package | SOT-223 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | Switch |
| Resistance | 80mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Current Rating | 1.95A |
| Base Part Number | IPS1041LPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.95A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1.95A |
| Current | 1.95A |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.95A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 38V |
| Output Current per Channel | 1.95A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 80mOhm |
| Height | 1.6mm |
| Length | 6.6802mm |
| Width | 7.2898mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1041LTRPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in TO-261-4, TO-261AA.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.The IPS1041LPBF family consists of this type.The operation is carried out using the 3 pins.The maximum output of the LED driving board is 1.95AV.Maximum output current falls to 1.95A when operation criteria are met.Surface Mount is mounted in the way of this LED driving board.In this LED driving board, there is 80mOhm resistance.This results in a 1.95A output current.The supply voltage should be set at 36V for best efficiency.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.For this electrical component, Switch is the classification.
IPS1041LTRPBF Features
Resistance of 80mOhm
IPS1041LTRPBF Applications
There are a lot of Infineon Technologies IPS1041LTRPBF Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- Various applications equipped with buttons
- Handheld Devices
- Smart Phones, Feature Phones
- Wearable Devices
- USB Ports/Hubs
- Hard Disk Drives
- Wireless/Networking Cards
- Wireless Modem Data Cards
