IPS1041RPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 80mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | IPS1041RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.2A |
| Operating Supply Voltage | 36V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Current - Output (Max) | 2.2A |
| Current | 2.2A |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.95A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 38V |
| Output Current per Channel | 2.2A |
| Rise Time | 7μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Current | 32μA |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 80mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
IPS1041RPBF Overview
As a result, it is packaged in the form of a Tube.It is included in the package TO-252-3, DPak (2 Leads + Tab), SC-63.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.I believe it belongs to the IPS1041RPBF family.For operation, 3 pins are used.There is a maximum output of 2.2AV from the LED driver.Maximum output current falls to 2.2A when operation criteria are met.Surface Mount is mounted in the way of this lighting driver.In this case, there is 80mOhm resistance in the LED driving board.As a result, the output current is set to 1.95A.In order to maximize efficiency, the supply voltage should be set at 36V.Keeping the operating temperature at 150°C°C ensures stable operation.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.Alternatively, 4.5V volts can be used if needed.In the case of this electrical component, it is classified as Switch.
IPS1041RPBF Features
Resistance of 80mOhm
IPS1041RPBF Applications
There are a lot of Infineon Technologies IPS1041RPBF Power Switches ICs applications.
- Portable Video Game Players
- Hard Disk Drives
- Wireless Modem Data Cards
- USB Power Distribution
- Storage Drives
- Hot-Swap Systems
- Wireless/Networking Cards
- Portable Devices
- Gaming
- Smartphone and PDA
