IPS1041RTRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 80mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | IPS1041RLPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.2A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.2A |
| Current | 2.2A |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.95A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 38V |
| Output Current per Channel | 2.2A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 80mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IPS1041RTRLPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.There is a IPS1041RLPBF family of things that it belongs to.The operation is carried out using the 3 pins.From the lighting driver, there is a maximum output of 2.2AV.In order to meet the operation criteria, the maximum output current drops to 2.2A.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 80mOhm ohms.As a result, the output current is set to 1.95A.In order to maximize efficiency, the supply voltage should be set at 5.5V.Stable operation is possible with a maximum operating temperature of 150°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.Electrical components classified as Switch belong to this category.
IPS1041RTRLPBF Features
Resistance of 80mOhm
IPS1041RTRLPBF Applications
There are a lot of Infineon Technologies IPS1041RTRLPBF Power Switches ICs applications.
- Handheld Devices
- USB Power Distribution
- Hot Swap
- Notebook and Tablet Computers
- Portable GPS Device
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Solid-State Drives
- Smartphone and PDA
- PC Card Hot Swap
