IPS1041RTRRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Supplier Device Package | D-Pak |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 80mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | IPS1041RPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.2A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.2A |
| Current | 2.2A |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.95A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 2.2A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 80μA |
| Rds On (Typ) | 80mOhm |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
IPS1041RTRRPBF Overview
It is packaged in the manner of a Tape & Reel (TR).In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.There is a IPS1041RPBF family of things that it belongs to.3 pins are used for operation.There is a maximum output of 2.2AV from the LED driver.Maximum output current falls to 2.2A when operation criteria are met.The LED driving board is mounted in the way of Surface Mount.In this case, there is 80mOhm resistance in the LED driving board.In this case, the output current will be set to 1.95A.For maximum efficiency, the supply voltage should be set to 5.5V.It is suitable for stable operation to operate at a maximum temperature of 150°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.
IPS1041RTRRPBF Features
Resistance of 80mOhm
IPS1041RTRRPBF Applications
There are a lot of Infineon Technologies IPS1041RTRRPBF Power Switches ICs applications.
- Portable Devices
- Telecom and Network Systems
- Portable Video Game Players
- Portable GPS Device
- Hot Swap
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Hot-Swap Systems
- Set-Top Boxes
