IPS1052GTRPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 160mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 1.25W |
| Max Power Dissipation | 1.25W |
| Current Rating | 1.3A |
| Base Part Number | IPS1052GPBF |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | Low Side |
| Power Dissipation | 1.25W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 38V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 28V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160mOhm |
| Drain to Source Resistance | 160mOhm |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS1052GTRPBF Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.I believe it belongs to the IPS1052GPBF family.In order to operate, the 8 pins are used.From the lighting driver, there is a maximum output of 500mAV.The maximum output current is reduced to 500mA to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 160mOhm resistance are used.When this case is used, the output current is set to 500mA.A supply voltage of 5.5V is recommended for maximum efficiency.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.Switch?is?the?classification?for?this?electrical?component.
IPS1052GTRPBF Features
Resistance of 160mOhm
IPS1052GTRPBF Applications
There are a lot of Infineon Technologies IPS1052GTRPBF Power Switches ICs applications.
- Solid-State Drives
- USB3.1 Power Delivery
- Storage Drives
- Notebook PC
- Telecom and Network Systems
- Set-top-box
- Wireless Modem Data Cards
- PC Cards
- Set-Top Boxes
- Low Voltage I/O System Power
