IPS2041RPBF

N-Channel PMIC IPS2041RPBF 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63

Manufacturer: Infineon Technologies
Nocochips NO: 376-IPS2041RPBF
Package: TO-252-3, DPak (2 Leads + Tab), SC-63
Datasheet: PDF
Stock: 843
Description: N-Channel PMIC IPS2041RPBF 3 Pin TO-252-3, DPak (2 Leads + Tab), SC-63 (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins	3
Supplier Device Package	D-Pak
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Published	2006
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	100mOhm
Max Operating Temperature	150°C
Min Operating Temperature	-40°C
Power Rating	2W
Max Power Dissipation	1W
Current Rating	1.4A
Base Part Number	IPS2041RPBF
Number of Outputs	2
Output Voltage	35V
Output Type	N-Channel
Max Output Current	1.4A
Operating Supply Voltage	60V
Voltage	5.5V
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Current - Output (Max)	1.4A
Current	1.4A
Output Configuration	Low Side
Power Dissipation	1W
Output Current	1.4A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Clamping Voltage	68V
Output Current per Channel	1.4A
Rise Time	900ns
Fall Time (Typ)	1.3 μs
Nominal Input Voltage	5.5V
Ratio - Input:Output	1:1
Voltage - Load	35V Max
Fault Protection	Current Limiting (Fixed), Over Temperature
Input Current	40μA
Rds On (Typ)	100mOhm
Drain to Source Resistance	130mOhm
Height	2.39mm
Length	6.73mm
Width	6.22mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

IPS2041RPBF Overview

The package is in the form of a Tube.There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 2.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.The IPS2041RPBF family contains this object.The operation is carried out using the 3 pins.This LED driver has a maximum output of 1.4AV.To comply with the operation criteria, the maximum output current is reduced to 1.4A.In this case, it is mounted in the way of Surface Mount.In this LED driving board, there is 100mOhm resistance.In this case, the output current will be set to 1.4A.The supply voltage should be set at 60V for best efficiency.A maximum operating temperature of 150°C°C is required for stable operation.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.It can work with as low a supply voltage as feasible, such as 4.5VV.