IPS511
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IPS511 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1.7A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 50 µs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| RoHS Status | Non-RoHS Compliant |
IPS511 Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the TO-220-5 package.The lighting driver has the mounting type Through Hole.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart features available on the LED driving board.It belongs to the family IPS511.It consists of 5 terminations in total.As far as the lighting driver is concerned, there are 1 functions.The LED driver output is limited to 1.7AV.Using a voltage of 14V allows for high efficiency.In this LED driver, the maximum supply voltage is configured to be 35V (Vsup).Normal operation requires Vsup above 5.5V.
IPS511 Features
Supplied from 14V
IPS511 Applications
There are a lot of Infineon Technologies IPS511 Power Switches ICs applications.
- USB Ports/Hubs
- Gaming
- PC Cards
- Set-Top Boxes
- Handheld Devices
- Smartphone and PDA
- Wearable Devices
- PC Card Hot Swap
- USB Power Distribution
- Wireless Headsets
