banner_page

IPS511GTR

N-Channel PMIC IPS511G 8 Pin 6V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-IPS511GTR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 458
  • Description: N-Channel PMIC IPS511G 8 Pin 6V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2002
Feature Auto Restart
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 130mOhm
Max Power Dissipation 1W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 6V
Current Rating 1.4A
Base Part Number IPS511G
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.4A
Operating Supply Voltage 35V
Voltage 35V
Interface On/Off
Nominal Supply Current 700μA
Current 1.4A
Output Configuration High Side
Power Dissipation 1W
Output Current 1.4A
Voltage - Supply (Vcc/Vdd) Not Required
Propagation Delay 15 μs
Input Type Non-Inverting
Turn On Delay Time 7 μs
Switch Type General Purpose
Output Current per Channel 1.4A
Drain to Source Voltage (Vdss) 50V
Turn-Off Delay Time 15 μs
Continuous Drain Current (ID) 1.4A
Ratio - Input:Output 1:1
Voltage - Load 5.5V~35V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature
Output Peak Current Limit-Nom 5A
Rds On (Typ) 130m Ω
Max Junction Temperature (Tj) 150°C
Drain to Source Resistance 150mOhm
Built-in Protections OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
On-State Resistance 130mOhm
Height 1.75mm
Length 4.98mm
Width 3.99mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

IPS511GTR Overview


Tape & Reel (TR) is the way it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Auto Restart features in order for it to be useful.It belongs to the IPS511G family.It has a total of 8 terminations.The operation is performed through the 8 pins.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 1.4A.A supply voltage of 6V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.In this LED driving board, there is 130mOhm resistance.In this case, the output current will be set to 1.4A.In order to achieve the best efficiency, the supply voltage should be set to 35V.

IPS511GTR Features


Supplied from 6V
Resistance of 130mOhm

IPS511GTR Applications


There are a lot of Infineon Technologies IPS511GTR Power Switches ICs applications.

  • Mobile Communication Devices
  • PC Card Hot Swap
  • Various applications equipped with buttons
  • Notebook PC
  • Telecom and Network Systems
  • USB Power Distribution
  • Smart Phones, Feature Phones
  • PC Cards
  • USB Ports/Hubs
  • Set-Top Boxes

Write a review

Note: HTML is not translated!
    Bad           Good