IPS511STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Supplier Device Package | D2Pak (SMD-220 5-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 135MOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.56W |
| Current Rating | 5A |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 1.7A |
| Nominal Supply Current | 700μA |
| Output Configuration | High Side |
| Power Dissipation | 1.56W |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 110mOhm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS511STRL Overview
It is packaged in the manner of a Tape & Reel (TR).Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Auto Restart features available on the LED driving board.The 5 pins are used to operate the LED driver.In this case, the LED driving board can produce only 1.7AV as its maximum output.Surface Mount is mounted in the way of this LED driving board.The LED driver has 135MOhm resistance.The output current is set to 3A in this case.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.
IPS511STRL Features
Resistance of 135MOhm
IPS511STRL Applications
There are a lot of Infineon Technologies IPS511STRL Power Switches ICs applications.
- Set-Top Boxes
- Portable/Handheld Devices
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Wearable Devices
- Wireless Headsets
- HDD, SSD
- Low Voltage I/O System Power
- Mobile Communication Devices
- Portable Devices
