IPS521G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Switch |
| Resistance | 80mOhm |
| Power Rating | 1W |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Current Rating | 1.6A |
| Base Part Number | IPS521G |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Operating Supply Voltage | 35V |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 600μA |
| Current | 1.6A |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 ms |
| Switch Type | General Purpose |
| Output Current per Channel | 1.6A |
| Rise Time | 130μs |
| Fall Time (Typ) | 16 μs |
| Turn-Off Delay Time | 35 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS521G Overview
It is package in Tube case.It is included in the package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Auto Restart.It is part of the IPS521G family of LED drivers.As a result, there are 8 terminations.8 pins are used for operation.It contains 1 functions.This results in the maximum output current dropping to 1.6A to meet the operation criteria.The supply voltage of 6V is conducive to high efficiency.It is positioned in the direction of Surface Mount.Currently, the LED driving board has a resistance of 80mOhm ohms.When this case is used, the output current is set to 1.6A.In order to maximize efficiency, the supply voltage should be set to 35V.A classification of Switch is assigned to this electrical component.
IPS521G Features
Supplied from 6V
Resistance of 80mOhm
IPS521G Applications
There are a lot of Infineon Technologies IPS521G Power Switches ICs applications.
- Wireless Headsets
- Portable Devices
- Portable Video Game Players
- Portable/Handheld Devices
- USB3.1 Power Delivery
- PC Cards
- PDAs
- Hot-Swap Systems
- Hard Disk Drives
- Hot Swap
