IPS521GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Current Rating | 1.6A |
| Base Part Number | IPS521G |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Supply Voltage-Max (Vsup) | 35V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 600μA |
| Output Configuration | High Side |
| Power Dissipation | 1W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 100mOhm |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS521GTR Overview
The package is in the form of a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Auto Restart.As you can see, it comes from the IPS521G family.It contains 8 terminations.The 8 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.6A.The supply voltage of 6V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has 80mOhm resistance.The output current is set to 1.6A in this case.This LED driver is configured to have a maximum supply voltage of 35V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 5.5V.
IPS521GTR Features
Supplied from 6V
Resistance of 80mOhm
IPS521GTR Applications
There are a lot of Infineon Technologies IPS521GTR Power Switches ICs applications.
- Solid-State Drives
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Wearable Devices
- Set-top-box
- Mobile Communication Devices
- Handheld Devices
- PDAs
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
