IPS5451
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 19mOhm |
| Terminal Finish | TIN LEAD |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 4A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | IPS5451 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 50V |
| Output Current per Channel | 4A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~18V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 19m Ω |
| Drain to Source Resistance | 25mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
IPS5451 Overview
It is packaged in the manner of a Tube.This file is included in package TO-220-5.In this case, the LED driving board is mounted as Through Hole.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It is part of the IPS5451 family of LED drivers.There are 5 terminations in it.Currently, there are 1 functions associated with the lighting driver.This operation requires the maximum output current to be decreased to 4A.Using a voltage of 14V allows for high efficiency.Through Hole is mounted in the way of this LED driving board.It has 19mOhm resistance.This case has the output current set to 1A.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.
IPS5451 Features
Supplied from 14V
Resistance of 19mOhm
IPS5451 Applications
There are a lot of Infineon Technologies IPS5451 Power Switches ICs applications.
- Hot Swap
- Portable GPS Device
- Solid-State Drives
- Smartphone and PDA
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Wearable Devices
- Wireless/Networking Cards
