IPS6041STRLPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Supplier Device Package | D2Pak (SMD-220 5-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Switch |
| Resistance | 110mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2.5W |
| Current Rating | 2.3A |
| Base Part Number | IPS6041SPBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.3A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.3A |
| Nominal Supply Current | 2.2mA |
| Current | 1.3A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.2mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Output Current per Channel | 2.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 110mOhm |
| Drain to Source Resistance | 110mOhm |
| Height | 4.826mm |
| Width | 11.3284mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS6041STRLPBF Overview
A Cut Tape (CT) is used to package it.It's included in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.There are Auto Restart features available on the LED driving board.It comes under the family of IPS6041SPBF.The operation is performed through the 5 pins.2.3AV is the maximum output of the LED driver.The maximum output current is reduced to 2.3A to meet the operation criteria.It is mounted in the way of Surface Mount.Currently, the LED driving board has 110mOhm resistance.The supply voltage should be set at 5.5V for best efficiency.A maximum operating temperature of 150°C°C is required to provide stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It operates at a maximum current of 2.2mA.Electrical components classified as Switch are included in this category.
IPS6041STRLPBF Features
Resistance of 110mOhm
IPS6041STRLPBF Applications
There are a lot of Infineon Technologies IPS6041STRLPBF Power Switches ICs applications.
- USB Ports/Hubs
- Portable Devices
- Various applications equipped with buttons
- Wireless Modem Data Cards
- USB Power Distribution
- Set-Top Boxes
- Telecom and Network Systems
- Mobile Communication Devices
- PC Cards
- Hot Swap
