IPS7071GPBF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | Switch |
| Resistance | 80mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 1.25W |
| Max Power Dissipation | 1.25W |
| Current Rating | 1.5A |
| Base Part Number | IPS7071GPBF |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 65V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Current - Output (Max) | 1.5A |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 15 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 70V |
| Output Current per Channel | 1.5A |
| Rise Time | 7μs |
| Fall Time (Typ) | 6 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Input Current | 40μA |
| Rds On (Typ) | 80mOhm |
| Drain to Source Resistance | 110mOhm |
| Height | 1.4986mm |
| Length | 5mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IPS7071GPBF Overview
It is packaged in the manner of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.This LED driving board is equipped with Auto Restart features in order for it to be useful.It comes under the family of IPS7071GPBF.During operation, the 8 pins are used.The LED driver output is limited to 1.5AV.This operation requires the maximum output current to be decreased to 1.5A.It is mounted in the way of Surface Mount.Currently, the LED driving board has 80mOhm resistance.This case has the output current set to 1.5A.Optimal efficiency requires a voltage of 65V.It is designed to be stable at 150°C°C, which is the maximum operating temperature.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.It can operate at low supply voltages, such as 4V volts.Electrical components classified as Switch are included in this category.
IPS7071GPBF Features
Resistance of 80mOhm
IPS7071GPBF Applications
There are a lot of Infineon Technologies IPS7071GPBF Power Switches ICs applications.
- Portable Video Game Players
- Gaming
- Portable GPS
- HDD and SSD
- USB3.1 Power Delivery
- Solid State Drivers
- Storage (HDDs, SSDs)
- PDAs
- Set-top-box
- Various applications equipped with buttons
